Need help? Call GOLFNOW Partner Support (844) 800‑GOLF
GolfNow Business

Reservations support

Samsung SRP-275/SRP-270 (V3.1)

Samsung SRP Model devices are used as a network printer for the Kitchen and Bar tickets.

Drivers and Software

Click Here to download the V3.10 configuration software for the SRP-27x impact printer

Configuring the SRP-27x Impact Printer

  1. Plug the printer in and turn off the printer.
  2. Download and Extract the above listed software to the desktop.
  3. Run the “Ethernet Configure Setup.exe” file and install.
  4. Turn the printer on.
  5. Run the “Configure” by going to Start | All Programs | BIXOLON | Configure.
  6. Click the “Search” button.
  7. Click on the MAC address of the printer in “Board list” and it will show the current printer properties.
  8. Change the IP Address to a larger number to match your network scheme (example: Change the Subnet Mask to your IP scheme and change the Gateway to your router’s IP address. Change the Serial Speed to 9600.
  9. Click the “Settings” button and it will load the settings.
  10. Click “Exit” to finish the program.

Installing the SRP-27x Impact Printer on a Computer

  1. Go to Start | Control Panel | Printers and Faxes,
  2. Click Add Printer,
  3. Click Next,
  4. Choose “Local Printer attached to this computer” and uncheck “Automatically Detect and install my Plug and Play printer”,
  5. Click Next,
  6. Select “Create a New Port” and choose Standard TCP/IP Port and click Next,
  7. The Create new TCP/IP Port wizard will appear. Click Next to the first window,
  8. Under Printer Name or IP Address, enter the IP Address that you specified in the configurator (in our case,
  9. Click Next,
  10. Under “Device Type” select “Custom” and click the Settings button,
  11. Make sure the Protocol is set to Raw and the Port Number is 6000 (the Local Port number from the Configurator above),
  12. Click OK and then click the Next button,
  13. Click Finish on the final step of the wizard,
  14. The wizard will then come to the manufacturers window of the Add Printer Wizard,
  15. Click Have Disk,
  16. Browse onto the GolfNow Reservations CD,
  17. Browse to folder of Printers | Tmdrve | Win2000 and use the OEMSetup.inf file,
  18. Click OK to get back to the Manufacturers window,
  19. Select the “EPSON TM-U200B Partial cut” printer,
  20. Click Next,
  21. Rename the printer to “Kitchen Printer” and select No for default printer,
  22. Click Next,
  23. Select “Do not share this printer”,
  24. Click Next,
  25. Select Yes to print a test page and click Next,
  26. Click Finish,
  27. During the copy procedure, a window will pop up asking for the CD. Click the OK button, and then click the Browse button,
  28. Click the “RASDL.DL_” file and hit the Open button,
  29. Click Ok,
  30. The wizard will complete and the test page will print.

Configuring SRP-27x in Impact Printer in GolfNow Reservations

  1. Setup | Hardware
  2. Click Printers
  3. Click Kitchen or Bar Tab
  4. Click Samsung SRP-27x under Installed Printers
  5. Select Font as Standard
  6. Select Size as Standard
  7. Click OK
Support categories

User guide

Barcode scanners
Credit card swipes
Personal data terminal
Pole display
Touch screens
Accounts receivable and billing
Awards, credits, gift certificates, misc.
Food and beverage
Inventory management
Sales items
Shopping cart